Rust-Oleum®
Commercial The MULE (Modified Urethane Latex Epoxy), Interior/ Exterior, Gloss Glass White, 1 gal Bucket/ Pail, 2/ Carton
Item #: RST375658
Safety Data Sheet
Shippable Product - Versatile, abrasion-resistant coating for walls, doors, trim, floors and more.
- Ideal for high traffic areas that are subject to routine cleaning and disinfection.
- Excellent adhesion qualities—compatible with a wide range of materials.
- Use it for interior and exterior sufaces.
- Low odor, water-based formula.
The MULE is an easy to use, abrasion-resistant commercial coating designed specifically for high traffic areas that are subject to routine cleaning and disinfection: schools, healthcare facilities, offices, hospitality environments and more. Verstile Modified Urethane Latex Epoxy (MULE) features excellent adhesion qualities, allowing it to be applied on a wide range of both primed and previously painted materials, indoor and out. Use it on walls, doors, moldings, railings and even floors. Low-odor, water-based formula.
Manufacturer:
Rust-Oleum®
Catalog:
eCatalog
Catalog page:
N/A
Technical specs:
Global Product Type
Building/Construction Paints & Primers
Paint Sub-Category
Epoxy,Water-Based
Color Family
White
Intended Application Environment
Interior/Exterior
Finish/Sheen
Gloss
Number of Colors
1
Volume Capacity
1 gal
Packaging Type
Bucket/Pail
Binder/Vehicle Ingredient(s)
Modified Urethane Latex Epoxy
Diluent/Solvent Ingredient(s)
Glycol Ether,Water
Color(s)
Glass White
Application Method
Brush,Roller
Application Temperature Range
50° to 90° F
Applicable Surface Material
Cement/Concrete,Drywall,Masonry,Metal,Plaster,Wood
Maximum Coverage Area
155 to 330 sq ft
Cure/Dry-Time Range
15 min (Touch),45 min (Handle),2 h (Recoat),24 h (Light Foot Traffic),3 days (Vehicle Traffic),7 days (Full Cure)
Age Recommendation
Ages 16 and Up
Product Biodegradability Indicator
N
Product Biodegradability in Days
0
Product Compostability Indicator
N
Compliance Standards
USDA FSIS Regulatory Sanitation Performance Compliant,VOC Compliant
Pre-Consumer Recycled Content Percent
0%
Post-Consumer Recycled Content Percent
0%
Total Recycled Content Percent
0%
Disclaimer Statement
For best results, apply within the recommended Application Temperature Range (50° to 90° F) when the surface temperature is also at least 5° F (3° C) above the dew point and the relative humidity is not greater than 85%.
Footnote 1
Recommended Dry Film Thickness (DFT) Per Coat: 1.5 to 2.5 mil
Footnote 2
Recommended Wet Film Thickness to Achieve DFT: 4 to 7 mil
Please wait